svg-pathdata

Manipulate SVG path data (path[d] attribute content) simply and efficiently.

Usage

Install the module:

npm install --save svg-pathdata

Then in your JavaScript files:

import {
  SVGPathData,
  SVGPathDataTransformer,
  SVGPathDataEncoder,
  SVGPathDataParser,
} from 'svg-pathdata';

Reading PathData

const pathData = new SVGPathData(`
  M 10 10
  H 60
  V 60
  L 10 60
  Z`);

console.log(pathData.commands);

// [  {type: SVGPathData.MOVE_TO,       relative: false,  x: 10,  y: 10},
//    {type: SVGPathData.HORIZ_LINE_TO, relative: false,  x: 60},
//    {type: SVGPathData.VERT_LINE_TO,  relative: false,          y: 60},
//    {type: SVGPathData.LINE_TO,       relative: false,  x: 10,  y: 60},
//    {type: SVGPathData.CLOSE_PATH}]

Reading PathData in chunks

const parser = new SVGPathDataParser();

parser.parse('   '); // returns []
parser.parse('M 10'); // returns []
parser.parse(' 10'); // returns [{type: SVGPathData.MOVE_TO, relative: false, x: 10, y: 10 }]

parser.write('H 60'); // returns [{type: SVGPathData.HORIZ_LINE_TO, relative: false, x: 60 }]

parser.write('V'); // returns []
parser.write('60'); // returns [{type: SVGPathData.VERT_LINE_TO, relative: false, y: 60 }]

parser.write('L 10 60 \n  Z');
// returns [
//   {type: SVGPathData.LINE_TO, relative: false, x: 10, y: 60 },
//   {type: SVGPathData.CLOSE_PATH }]

parser.finish(); // tell parser there is no more data: will throw if there are unfinished commands.

Outputting PathData

const pathData = new SVGPathData(`
  M 10 10
  H 60
  V 60
  L 10 60
  Z`);
// returns "M10 10H60V60L10 60Z"

encodeSVGPath({ type: SVGPathData.MOVE_TO, relative: false, x: 10, y: 10 });
// returns "M10 10"

encodeSVGPath({ type: SVGPathData.HORIZ_LINE_TO, relative: false, x: 60 });
// returns "H60"

encodeSVGPath([
  { type: SVGPathData.VERT_LINE_TO, relative: false, y: 60 },
  { type: SVGPathData.LINE_TO, relative: false, x: 10, y: 60 },
  { type: SVGPathData.CLOSE_PATH },
]);
// returns "V60L10 60Z"

Transforming PathData

This library can perform transformations on SVG paths. Here is an example of that kind of use.

Transforming entire paths

new SVGPathData(`
   m 10,10
   h 60
   v 60
   l 10,60
   z`)
  .toAbs()
  .encode();
// return s"M10,10 H70 V70 L80,130 Z"

Transforming partial data

Here, we take SVGPathData from stdin and output it transformed to stdout.

const transformingParser = new SVGPathDataParser().toAbs().scale(2, 2);
transformingParser.parse('m 0 0'); // returns [{ type: SVGPathData.MOVE_TO,       relative: false, x: 0, y: 0 }]
transformingParser.parse('l 2 3'); // returns [{ type: SVGPathData.LINE_TO,       relative: false, x: 4, y: 6 }]

Supported transformations

You can find all supported transformations in src/SVGPathDataTransformer.ts. Additionally, you can create your own by writing a function with the following signature:

type TransformFunction = (command: SVGCommand) => SVGCommand | SVGCommand[];

function SET_X_TO(xValue = 10) {
  return function(command) {
    command.x = xValue; // transform command objects and return them
    return command;
  };
};

// Synchronous usage
new SVGPathData('...')
  .transform(SET_X_TO(25))
  .encode();

// Chunk usage
new SVGPathDataParser().transform(SET_X_TO(25));

Contributing

Clone this project, run:

npm install; npm test

API

Functions

annotateArcCommand()

https://www.w3.org/TR/SVG/implnote.html#ArcImplementationNotes Fixes rX and rY. Ensures lArcFlag and sweepFlag are 0 or 1 Adds center coordinates: command.cX, command.cY (relative or absolute, depending on command.relative) Adds start and end arc parameters (in degrees): command.phi1, command.phi2; phi1 < phi2 iff. c.sweepFlag == true

intersectionUnitCircleLine()

Solves a quadratic system of equations of the form a * x + b * y = c x² + y² = 1 This can be understood as the intersection of the unit circle with a line. => y = (c - a x) / b => x² + (c - a x)² / b² = 1 => x² b² + c² - 2 c a x + a² x² = b² => (a² + b²) x² - 2 a c x + (c² - b²) = 0

arePointsCollinear(p1, p2, p3) ⇒

Determines if three points are collinear (lie on the same straight line) and the middle point is on the line segment between the first and third points

createEllipse()

Creates an ellipse path centered at (cx,cy) with radii rx and ry

createRect()

Creates a rectangle path with optional rounded corners

createPolyline()

Creates a polyline from an array of coordinates [x1,y1,x2,y2,...]

createPolygon()

Creates a closed polygon from an array of coordinates

REMOVE_COLLINEAR(commands) ⇒

Process a path and remove collinear points

REVERSE_PATH(commands, preserveSubpathOrder) ⇒

Reverses the order of path commands to go from end to start IMPORTANT: This function expects absolute commands as input. It doesn't convert relative to absolute - use SVGPathDataTransformer.TO_ABS() first if needed.

annotateArcCommand()

https://www.w3.org/TR/SVG/implnote.html#ArcImplementationNotes Fixes rX and rY. Ensures lArcFlag and sweepFlag are 0 or 1 Adds center coordinates: command.cX, command.cY (relative or absolute, depending on command.relative) Adds start and end arc parameters (in degrees): command.phi1, command.phi2; phi1 < phi2 iff. c.sweepFlag == true

Kind: global function

intersectionUnitCircleLine()

Solves a quadratic system of equations of the form a * x + b * y = c x² + y² = 1 This can be understood as the intersection of the unit circle with a line. => y = (c - a x) / b => x² + (c - a x)² / b² = 1 => x² b² + c² - 2 c a x + a² x² = b² => (a² + b²) x² - 2 a c x + (c² - b²) = 0

Kind: global function

arePointsCollinear(p1, p2, p3) ⇒

Determines if three points are collinear (lie on the same straight line) and the middle point is on the line segment between the first and third points

Kind: global function
Returns: true if the points are collinear and p2 is on the segment p1-p3

createEllipse()

Creates an ellipse path centered at (cx,cy) with radii rx and ry

Kind: global function

createRect()

Creates a rectangle path with optional rounded corners

Kind: global function

createPolyline()

Creates a polyline from an array of coordinates [x1,y1,x2,y2,...]

Kind: global function

createPolygon()

Creates a closed polygon from an array of coordinates

Kind: global function

REMOVE_COLLINEAR(commands) ⇒

Process a path and remove collinear points

Kind: global function
Returns: New array with collinear points removed

REVERSE_PATH(commands, preserveSubpathOrder) ⇒

Reverses the order of path commands to go from end to start IMPORTANT: This function expects absolute commands as input. It doesn't convert relative to absolute - use SVGPathDataTransformer.TO_ABS() first if needed.

Kind: global function
Returns: New SVG commands in reverse order with absolute coordinates

Authors

• Nicolas Froidure
• Anders Kaseorg

License

MIT